15/17 Ladwadi Bldg, R No.27,
Old Hanuman Lane,
Kalbadei Road, Mumbai., Maharashtra 400002
ph: +91 22 2206 4440
fax: +91 22 2206 4441
arhamsci
As per IP 212 and ASTMD-490. Used for determining the Viscosity of lubricating and fuel oils.It consists of S.S. Water Bath having Oil Cup with Lid. The water bath stirring device Mounted on stand. A Thermometer clip to the Water bath and the Oil Cup[ lid has a Thermometer socket. The Bath is fitted with 500 watts heater. It is supplied with Wooden or ebonite valve to fit jet. (Without glass wares). Suitable to operate on 220 volts AC mains. Electrically heating with energy regulator control accessories for the Above: Flask receivers 200 ml capacity
These Viscometers are designed for viscosity tests of petroleum products. They confirm. To requirements of IP 70. Two adoption of Red Wood
viscometer No. I
For liquids having Red Wood flow 20 seconds to 2000 seconds comprises hammer finished Stainless steel bath with electrical heating Arrangement suitable to operate at 220 Volts AC main with tap, siler plated oil cup with precision stainless steel jet, cup cover, ball valve, thermometer-clip. Stirrer and M.S. Sheet stand with leveling screws. Electrically heated model with energy regulator control.
Accessories for the above:
(A) Flask receivers 50 ml -1 No.
(B) Thermometer-100 C-2 Nos.
Viscometer no II
for liquids whose Redwood flow from 20 sec to 4000 sec With similar construction and accessories as indicated above
As per ASTMD-88 specifications with Universal and Furol Jets made of Stainless Steel. Stirring is done by hand with turn table arrangement (without Strainer, withdrawal Tube and glass wares). Suitable to operate on 220 Volts AC mains. Electrically heated with energy regulator control
Accessories for the above
(A) Flask 60 CC
(B) Thermometer-2Nos.
For determination of softening point of bituminous materials according to IP 58 and IS 1205-1958. Softening point is that temperature at which the specimen under test becomes soft enough to allow a steel ball for specified dimensions to fall a required distance under test condition. The apparatus consists of glass beaker, ring stand, two steel balls ring and ball guides hand stirrer.
(A) Softening Point Apparatus with FHP electric driven stirrer and Electric heater with temperature regulator control.
(B) Thermometer-2 Nos.
This apparatus is used for penetration test on a wide variety of materials such as greases, petroleum, bitumen, tax, wax, polish, foodstuff, rubber asphalts and pharmaceutical creams. A given force is applied over a given period of times and the depression is made in the sample which is measured in tenths of a millimeter and expressed as penetration. It consists of a head support mounted on a vertical rod assembly provides fine adjustment of needle tip to sample and in corporate a slipping clutch mechanism which make reading of penetration and subsequent resetting a sample and accurate operation. The dial graduate from 0-400 in one tenth millimeter sub division. The instrument is supplied with two sample contains.
(A) Penetrometer Apparatus with containers and weights having PENETRATION CONE hollow type
(B) Grease worker hand operated
(C) Grease Cutter
(D) Transfer dish
This apparatus is made as per IP34, ASTMD-93-58T and IS 1448 (Part 1) 1270 and IS 1209-1953 Method B. The apparatus consists of brass test cup with handily removable cup cover with spring operated rotating shutter having pilot jet, stirre with flexible shaft, The Assembly rests in Air Bath which is covered with Dome shape metal top. The fitted with insulated handle and locking arrangement near Cup Flange. The assemble is kept on round shape electric heater with temp. regulator. Suitable for operation 220 Volts 50 cycles AC Circuits. With oil test jet electrical heating with energy regulator,Accessories for the above:
(A) Thermometer- 100 C-1 No.
This apparatus is used for determination of flash point and fire point of petroleum products except fuel oil with open cup flash below 80 deg.c. as per specification IP. 36 and IS: 1448 The apparatus consists of a cup, heating plate to specific dimension thermometer clip and test flame attachment with swivel joint for passing over test liquid surface in the prescribed manner, Heating is controlled by means of energy regulator fitted to the apparatus. Suitable for operation on 220 Volts 50 Cycles AC Circuits. Electrical heating with energy regulator controlAccessories for the above:
(A). Thermometer- 100 C-1 No.
This apparatus is suitable for determining the close cup flash point of petroleum and mixtures According to IP 33 and 170 and also IS 1448 (part 1) 1985 (P:20). It is suitable for oils Whose flashes below 70 deg.c. It is supplied with oil cup, cover fitted with stirrer, thermometer Socket S.S. Water bath, Stand. An electric heater is fitted at bottom for operation on 220 VoltsAC Circuits.
With oil test jet, electric heating with energy regulator control,
Accessories for the above:
(A) Able oil cup thermometer with brass collar
(B) Able water bath thermometer with brass collar
(C) Pendulum for measuring time in stroke
This is made according to specification laid by IP 15 & IS 1448 (P:10) 1970. The pour point is lowest temperature at which the oil will just fail to flow. The apparatus consists main cooling bath made out of S.S. sheet and stand unit with drain plug and cover has provision for fitting thermometer and a filling aperture for adding freezing mixture. A glass jar for containing oils, jacket, disc and gasket as specified are also provided.
(A) Cloud & Pour Single with insulated body
(B) Cloud & Pour Point Thermometer
(C) Cloud & Pour Point Thermometer Aniline Point App.
Abel Flash Point App.
Acidity by Extraction App .
Ageing Oven.
ASTM Colour Comparator / Discs.
ASTM Thermometers.
Breaking Strength App.
Bomb Calorimeter.
Brookfield Viscometer
Burning Test Lamp.
Bitumen Extractor.
Consistency of Grease App.
Cast Iron Corrosion Test App .
Concrete Test Hammer.
Corrosion Stability Test App.
Cleaveland Fire & Flash Pt.App.
Constant Temp Bath.
Copper Corrosion Test App.
Copper Corrosion Chart (ASTM).
Conductivity Meter.
Conradson Carbon Residue App.
Cloud & Pour Point App.
Ductility Test App.
Dean & Stark App.
Demulsification App.
Density Hydrometers.
Dew Point Apparatus
Distillation Range App.
Drop Point of Grease App.
Engler Viscometer.
Existent Gum App.
Explosive Gas Detector.
Engine Oil Lab(Portable).
Evaporation Loss of Grease App.
E.V.T. Viscometer.
Freezing Point App .
Flow Cup Viscometer.
Foaming Characteristics App.
Furnace Oil Viscosity Gauge.
Grease Worker./Grease Cutter.
Hydrogauge.
Heat Stability App.
I.P.Thermometers.
Falling Ball Viscometer.
Kinematic Viscometer Bath .
Karl Fischer Titration App.
Loss of Heating App.
Leakage Tendency of Grease App.
Melting Point App .
Saponification Value App .
Sulphonation Flask .
Oxidation Test Apparatus.
Oxidation Stability App .
Oil Sep. on Storage of Grease App.
Oil Content of Pet. Wax App.
Oil Centrifuge.
Pensky Marten Flash Pt.App.
PH Meter.
Penetrometer.
Petroleum Hydrometers.
Potentiometric Titration App .
Redwood Viscometer.
Rust Preventive App.
Ring & Ball App.
Ramsbottom Carbon
Residue App.
Saybolt Viscometer.
Sulphur Content App .
Smoke Point App.
Sediment by Extraction App.
Sampling Bomb .
Surface & Interfacial Tensiometer.
Softening Point App.
Tag Flash Point App.
TDS Meter.
Turbidity Meter.
Tar Viscometer.
Titer Test Appartus.
Ultrosonic Cleaner.
Vapour Pressure App .
Visgage.
Vacuum Pump
Water Washout App. etc .
Arham Scientific Co.(Mumbai)
All trademarks used in this website are the property of their respective owners. Any omission of such trademarks from any product is regretted and is not intended as an infringement on such trademarks.
15/17 Ladwadi Bldg, R No.27,
Old Hanuman Lane,
Kalbadei Road, Mumbai., Maharashtra 400002
ph: +91 22 2206 4440
fax: +91 22 2206 4441
arhamsci